Mississauga Residential Plumbing

To unclog a drain using a plunger, make sure you have a plunger that is designed for sinks. Look for one with a flat, narrow bottom that can create a strong seal. To create the right amount of pressure, fill the sink with water until it covers the rubber cup of the plunger. To unclog the drain, just follow these simple steps: 

1. Put the plunger over the drain. 
2. Make sure it’s tightly sealed.
3. Firmly push and pull the plunger up and down. 

To see if there’s still a blockage, simply turn on the faucet for a minute. Once the water is flowing smoothly, the task is considered finished. If you’re dealing with stubborn clogs, you might want to try re-plunging or using other methods like a drain snake or organic cleaner. Just be careful when using chemical cleaners.

To fix this, start by turning off the water supply to the faucet. You can do this by using the shut-off valves under the sink, or if there are no separate valves, use the main water supply. Turn on the faucet to let out any water that is left, so it doesn’t make a mess.

To access the handle of the faucet, you will need to unscrew a decorative cap or pry off a cover, depending on the type of faucet. Inside, you will find the cartridge, valve, or seat and spring, which are often the cause of the leak. Thoroughly examine these parts for any signs of damage, corrosion, or wearing out.

If any parts are broken, you can find replacements at a hardware store nearby. Put the faucet back together, making sure it is in the correct position. Please re-activate the water supply and slowly turn the faucet on to see if there are any leaks. If the leak is fixed, it means your faucet has been successfully repaired. If you continue to have problems, you should contact a professional plumber in Mississauga.

To address a running toilet, open the tank lid and inspect the components. Adjust the float or replace the fill valve if water keeps flowing into the overflow tube. Adjust the float arm or replace the damaged float mechanism if the tank’s water level rises and spills into the overflow tube.

A worn or misaligned flapper can cause a running toilet. Inspect the flapper for damage or misalignment, and replace if needed.

A malfunctioning flush valve may be the issue. A broken or rusted part can cause water to flow continuously. Replace the flush valve.

Check the toilet base for water leaks regularly. Water on the floor may indicate a broken wax ring or insecure toilet attachment. Address these issues promptly to prevent water damage in the area.

• To prevent drain clogs, develop simple habits. Don’t pour hot cooking oil or grease down the sink to prevent clogs. These substances can harden and cause blockages when they cool. Let them cool in a container before disposing in the trash. Use a paper towel to clean greasy pans and dishes before washing them. Also, use a sink strainer to catch food bits and prevent them from going down the drain. Follow these practices to prevent pipe clogs. This will improve your plumbing system and prevent issues.

Run cold water while using the disposal to clean it and remove food particles and debris. Use citrus peels or ice cubes to eliminate odours and freshen the air. To maintain your disposal and prevent clogs, avoid putting non-food items, fibrous materials, or hard objects into it. They can damage blades or cause blockages. 

To unclog your disposal, use a wrench or hex key to manually turn the grinding mechanism. Refer to the product’s instructions for further assistance with a clog. Follow these steps for longer-lasting and more efficient garbage disposal.