Archives for Uncategorized

How to Find the Source of Dampness in the Basement

Waterproofing your basement is a good idea if you are experiencing problems with dampness, mold and mildew. If you smell a strong musty smell whenever you go down into your basement, it is often an indication of a water problem. If you ignore this early warning sign, eventually, over time, it can become worse and lead to actual water in the basement.

The first thing you need to do is determine the source of the dampness or water. One easy trick is to tape a large piece of aluminum foil to each basement wall and leave it up for at least 24 hours. Then, the next day, check it for signs of condensation. If the dampness on the outside of the foil, it signifies you have a high humidity level in the basement.

When the air reaches the cooler basement foundation walls, it is cooled and condensation forms. The easy fix for humidity problems is to get a humidifier and use it to remove the excess humidity from the basement.

On the other hand, if you find condensation under the foil, it means the water is being forced through the walls due to hydrostatic pressure and could be the result of rising and falling groundwater levels or poor drainage around the exterior of the home. In this case, you will want to get your basement walls waterproofed by a qualified plumber and drain cleaning service in Mississauga, like us, here at My Precise Plumbing.

Why Use a Professional?

Granted, there are DIY products on the market but these do not necessary address the actual cause of the dampness and water in your basement. Most DIY solutions are essentially a Band-Aid and fail to fully identify the source of the problem so it can be resolved properly. For instance, one DIY solution some people try are those “coatings” they apply to their basement walls on the interior of the home.

While this stops the dampness from forming on the walls, water could start accumulating inside the cement or cinder blocks that support the home. Eventually, the water will build up enough hydrostatic pressure and force itself through the coating, creating an even bigger mess.

Furthermore, the types of solutions that will work best for your home can vary based upon the type of water problem you are experiencing. It is for these reasons you should obtain a professional opinion. The most effective solution to preventing water and dampness from getting into your basement is to have the exterior foundation walls waterproofed.

In cases where the foundation is not easily accessible, the next option is interior waterproofing. With our detailed interior water heater, we provide a complete solution for addressing the water problem, ensuring it drains away correctly, and prevents damaging the foundation of your home.

For more information about waterproofing your basement, or to obtain a free quote, please feel free to contact My Precise Plumbing at (647) 878-9293 today!

Read more

Are Tankless or Traditional Water Heaters Better

Are Tankless or Traditional Water Heaters Better?

When you are building a new home or need to replace your existing water heater, there are two common types of water heaters you will find available through plumbing companies in Mississauga: Tankless water heaters and traditional water heaters. While both provide hot water for your home, there are major differences on how they operate, as well as the benefits they provide.

Deciding which water heater is the best solution for your home should be made after reviewing the following information to help you better understand the differences, as well as the benefits of each type of water heater. In addition, you might want to consider scheduling a consultation appointment with an experienced and knowledgeable Mississauga plumber for their recommendations, based upon your needs.

Traditional Water Heaters

Traditional water heaters hold a specified amount of water and use either natural gas or electricity to heat water to a preset temperature. Most water heaters of this type hold between 30 and 50 gallons (around 113 to 189 litres) of water. Whenever you use hot water to bathe, shower, do dishes, or laundry, the preheated water is pumped out and replaced with cold water, where it is reheated to the preset temperature.

Benefits:The two main benefits of traditional water heaters are they tend to cost less and are easier to install in most homes.

Cons: There are several drawbacks you should be aware of with traditional water heaters, including:

  • Higher Energy Bills – Water in the entire tank, is reheated whenever it drops below the preset temperature and anytime hot water is used.
  • Requires More Space than Tankless Water Heaters
  • Potential to Run Out of Hot Water
  • Shorter Life Spans – On average, traditional water heaters last around 15 years or less.

Tankless Water Heaters

Tankless water heaters create hot water as it is needed using either natural gas or electricity, without having to store it in a tank.

Benefits:There are several benefits of tankless water heaters, including:

  • Lower Energy Bills – For homes that use less than 40 gallons (about 151 litres) of hot water daily, energy bill savings could be as much as 34% or more for water heating costs.
  • Takes Up Less Space – Since they are much smaller, there is more flexibility in where tankless water heaters can be installed.
  • Creates Hot Water on Demand – You never have to worry about running out of hot water, which is perfect for large families.
  • Longer Life Spans – On average, tankless water heaters lasts 20 to 30 years, sometimes longer.

Cons:There are a few drawbacks to tankless water heaters, which are a higher upfront cost and retrofitting to replace traditional water heaters could increase overall installation costs, in some situations.

To learn more about traditional and tankless water heaters for your home and help selecting the most appropriate solution, call the experts at My Precise Plumbing at 647-878-9293 now.

Read more

Difference Between Hard Water and Soft Water

What Is the Difference Between Hard Water and Soft Water?

Most of the water in Toronto, and throughout Canada is considered to be hard water. Hard water is defined by the hardness within the water caused by natural occurring sources, most notably calcium and magnesium. While neither of these minerals pose health risks, as long as there is not an excess quantity of the minerals within the water, there is concern over the potential damage they can cause to plumbing, hot water heaters, dishwashers, coffer makers, faucets, shower heads, and toilets due to scaling.

Soft water is water that does not contain natural occurring hardness minerals. Even though there is a small amount of natural occurring soft water in various locations, it is often created using various processes, along with water softener systems, to help remove calcium, magnesium, and other minerals. The softening processes used often depend on whether the water is being softened at home with a home water softener or by your water provider.

How Does Hard Water Affect Plumbing?

Since hard water contains minerals, it causes scaling to form on the interior of pipes. Overtime, the scaling can buildup and become sufficient enough to create a reduction in water pressure and eventually, blockages, preventing the flow of water. If this occurs, it is recommended to contact a qualified plumbing company in Mississauga to determine whether the pipes can be cleaned or have to be replaced.

How Does Hard Water Affect Energy Usage?

Scaling prohibits the transfer of heat efficiently. As a result, the energy efficiency of hot water heaters declines and results in an increase in energy bills. Eventually hot water heaters have to be replaced from excessive scaling.

How Does Hard Water Affect Cleaning?

The minerals in hard water are more resistant to soaps, detergents, and cleaning products. As a result, it requires using more of these products in order to achieve the desired results, which further increases costs for cleaning products. Hard water will also leave water stains, in the form of small white spots, on cooking utensils, glasses, dishes, pots, pans, and other hard surfaces. With soft water, it reacts more effectively with these products, and depending upon the softness of the water, it is possible to reduce the amount of cleaning products required by up to 50%, saving you money.

How Does Hard Water Affect Showering/Bathing?

While hard water poses no risks for showering and bathing, as already mentioned, it does create scaling and requires using more soap and shampoo to get clean. The scaling forms on the sides of showers and tubs, as well as in showerheads and faucets, and will require more frequent cleaning and descaling. Eventually, showerheads and faucets have to be replaced, especially if there is a decrease in water flow.

For more information about the differences between hard and soft water and water treatment solutions for your home, contact My Precise Plumbing by calling 647-878-9293 today.

Read more

How to Prevent Frozen Water Pipes

One of the most common types of plumbing problems people call Mississauga plumbers for during the winter are burst water pipes after they have frozen. The reason frozen water pipes burst is because they are under extreme pressure. As the water freezes and turns into ice, there is less room in the pipe for water to flow. As the pipe completely freezes, ice tends to expand.

The increase in pressure can result in a small leak at a pipe joint or cause a crack in the pipe itself. It is when the water starts to thaw that things get really wet, messy, and costly. Most homeowners, who have dealt with bursting water pipes after a deep freeze spend on average around $5,000 to get the home dried out, replace anything damaged by the water, and fix the broken pipes.


The best advice plumbers in Mississauga can give on how to prevent frozen water pipes is to take steps to ensure pipes are correctly insulated from the cold. If your home has vented openings for the crawl space or other areas with air leaks where cold air can reach pipes, there is always the risk they could freeze and burst. In addition, it is recommended to use some sort of insulating cover on outdoor water faucets to protect them throughout the winter.


When overnight temperatures turn extremely cold, it is better to keep a few faucets turned on and allow the water to drip throughout the night. Leaving a faucet open prevents pressure from building up in the water pipes, even if they do freeze. Normally, it is best to turn on faucets that are furthest from the point where the main water line enters your home.


For instance, if the main water line is in the back of the house near the kitchen, leaving the kitchen sink dripping does nothing for pipes that could be on the other side of the house and connected to your bathroom. If you are unsure where the water main enters the home, it does not hurt to turn on faucets in multiple areas of the home. Remember to turn on both cold and hot water sides of the faucet. Hot water lines also run underneath the home where they can freeze.


What If My Pipes Freeze?

In the event your pipes freeze, you need to make sure the faucets are open to alleviate pressure within the pipes. Turn off the water main valve, as well, as this will prevent water from free flowing once the pipes thaw and helps avoid water damage should there be a leak or crack in a water pipe.

The next thing you want to do is get the pipes thawed. Thawing pipes can be a time consuming process. Contact an experienced plumber for tips on how to correctly thaw your pipes. Never use an open flame or electric appliance as these can create undesired hazards. Once the pipes have thawed, you need to check for leaks and cracks.

Even if you were lucky and do not notice any cracks or leaks, it is beneficial to have a professional plumber visit your home to help you determine the cause for the frozen pipes, as well as check the integrity of pipes, as next time you might not be as lucky.

For more information on how to prevent frozen water pipes, or emergency service if you experience cracked and leaking water pipes, do not hesitate to contact Precise Plumbing now at 647-878-9293. We offer 24 hour emergency plumbing services in Mississauga and a 100% satisfaction guarantee.

Read more

How to prevent drain damage

How to prevent drain damage
Most houses have several different drains, from the bathrooms to the kitchen. When these drains are working well, life is good, and people tend not to worry about the plumbing, but when a drain starts to malfunction, life can become a nightmare. Fortunately, there are high quality Mississauga plumbing options, but if you properly maintain your drains, you can avoid the need for drain repair services, and save yourself a great deal of heart ache. There are several important steps to take, in order to avoid drain damage.
One of the most common drain repairs is the clogged drain. A clogged drain can happen for a variety of reasons, and most of the reasons are completley preventable. One reason that a drain can clog is due to the long term build up of hair and other particles. This is one of the easiest drain clogs to avoid, you simply need to install a drain screen on your drains. This screen will capture the particles before they have a chance to go down the drain. By installing a drain screen, you can quickly avoid a drain clog.
Another common cause of a clogged drain is the disposal of kitchen grease. Many people pour kitchen grease down the drain, where it can then solidify and cause a major clog in your drain. In order to prevent this, you should dispose of your kitchen grease in a coffee can, and dispose of the coffee can later. Fixing a drain that is clogged with grease is extremely difficult and costly, so make sure you take the proper steps to prevent the need for drain repair services.
Proper maintenance is also essential to prevent the need for drain repairs. There are several steps you can take to maintain your drain. One step is to run hot water down your drain after each use, to catch any items that are trapped in your drain. On occasion, you can also pour a cup of vinegar down your drain in order to clean out any build up that is in your drain. By regularly cleaning your drain, you can ensure that your drain stays in the best possible shape.
While you should follow all of these steps, you will eventually need drain repair services. When the day comes when you need Drain Cleaning Mississauga, you should call us, and we’ll be happy to get your drains working quickly.
Read more

Why plumbing tools are essential in Mississauga?

Best Locking Pliers

If you live in Mississauga, plumbing tools are essential. There are a few new plumbing products on the market to help you deal with those challenging projects, whether you do your own do-it-yourself projects on weekends or you have several Mississauga  Drain Cleaning , Mississauga plumbers use:

Check out the Knipex Cobra with a comfort grip and smaller handle. You can pick from chrome plated, slim or a Cobramatic. The benefit is you have 25 different jaw positions.

Another top option is the Irwin GrooveLock that comes in multiple sizes and has a jaw capacity of up to 6″ if you buy their 20″ version. You can pick from straight jaw, smooth jaw or V-jaw with 16 jaw positions.

No matter which you go with, they’ll both do the same job and offer several benefits!


In Mississauga, plumbing tools are a top priority if you have a leak or weekend project you want to work on. Keep the best tools in your toolbox for all your plumbing needs. Include these essential tools which are the top tools Mississauga plumbers use:

  • Needle Nose Pliers: Used to help grasp small parts, you always want to keep these on hand to grasp small pieces.
  • Plumber’s Tape: To ensure you have a tight seal on threaded pipes, showerheads or faucets, you can look for this Teflon tape at Home Depot and keep a roll in your toolbox.
  • Plumber’s Putty: To make that water tight and water resistant seal, this is the perfect “glue” in sink drains.
  • Basin Wrench: Anogher great wrench for tight spots, this works perfectly when you’re under the sink.

By keeping the essentials handy, you won’t be stuck under the sink all day when the game is on! That’s what weekends are for!

If you’re a weekend DIY plumber in Mississauga, plumbing tools are essential. Trying to find the best tools might have you at Home Depot all day. You might have dozens of tools depending on the type of projects you’re facing. Break down your tools by the type of project you’re working on:

  • sink installation and repairs
  • washing machine installations
  • toilet and tub replacements and repairs

Be sure to research the parts you will need ahead of time so you don’t have to make another trip back to Home Depot – unless you want to see that new outdoor grill again!

Read more